Karam Industries

Posted on February 21, 2020 by kara mindustria

What Are the Usages of Collated Nails?

Collated nails are one of the most common types of nails that can be found everywhere. The only difference between regular nails and collated nails is that the regular nails comes separated whereas the collated nails are regular nails bind into one strip so that they can fired from a nail gun easily. Even though there are various types of collated nails which are available but they are primarily used for nail guns.

Definition of collated nails

The types of nail which are typically used in the nail guns are known as the collated nails. The collated nails are bind together using various substances such as plastic, glue, wire, or paper.

Now, there are various types of collated nails which are available in the market. Though there are not much difference among them, but each of them are used for separate types of nailing. Moreover, the type of collation that is used for collation can also set the difference between the various types of collated nails.

And various applications require various types of nails. And to find the right one, you will need to decide that what exactly you need it for.

The various type of nail Collation those are available today

Paper collation

Paper is one of the most common types of framing nails that are available today. They are primarily used at a 34-degree angle. The nails are bind together using paper along with a type of glue. And the usage of paper lowers the manufacturing cost as well which makes it cost friendly as well.

Plastic Collated nails

As per the coil framing nails supplier, apart from paper collated nails, the plastic collated nails are also in high demand. They are used when working at a 20-22-degree angle. They are also used for holding the coil nails at a fifteen-degree angle. The plastic collated nails are highly popular in carpentry and construction sites.

Glue collated nails

Glue is not the only content in the Glue collated nails. They are rather used in staples and floor cleats and are shaped identically so that they can be easily stacked.

Wired collated nails

The wired collated nails are used as an alternative to the paper or plastic collated nails. They are typically used for 28-degree framing nails and for 15-degree coil nails.

So, now that you know about the various type of framing nails, make sure that you are buying the right one from the collated nails Supplier.

Posted on February 21, 2020 by kara mindustria

A Few Things to Learn About House Construction

When it comes to the construction of a house, there are several considerations and processes that are involved in it. However, all the processes are of equal importance since they are interdependent. This is why having a little bit of knowledge about each process can make for significant help in the building process. From the perspective of a contractor, the building process essentially involves two main phases, dry and wet. While the wet phase focuses more on the initial phase of building the house, the dry phase starts when the house is protected from moisture. This is when all of the electrical work gets done for the house as it is safe from rain and snow.

What are the stages involved in the finish of a house?

However, when it comes to fixing the construction of a house, it can be further broken down into two phases, the rough in and the finish. These stages can get divided based on the finish of the walls. Further mentioned below are the steps involved to finish the work of your house:

Underground conduit and temporary electricity

Since the use of machinery is imperative in such a process, and there is no electrical connection available at hand, constructors use temporary electricity or underground conduits to help themselves with this. They use a temporary electric pole or a generator, and before the floor gets finalized, the workers lay down electrical conduits as well. This is the electrical fitting that gets done in the wet phase and can get completed in a few hours.

Rough-in

This step gets carried out once the doors, windows, and floors have been totally completed but with the sheetrock still left to be. The bulk nails supplier takes care of all these to your entertainment systems, and televisions and is mainly focused on creating a circuit wiring between the wall studs and electrical box by use of holes. For small homes, this process can be a few days. However, bigger homes can take up months.

Miscellaneous and the finish

In this stage, first, everything gets checked and tested to see if they work properly. The house owners are then asked if they need anything more. If not, the Coil Nails Supplier can help you out with all your house renovation problems and procedures.

It is strongly advised that you take the help of an electrical professional before carrying out any of the steps. Although the stages might seem easy, it gets more complicated with every advancing step. However, with the help of a professional, you can easily avoid certain risks.

Posted on January 27, 2020March 22, 2020 by kara mindustria

Facts About Nails you Probably Didn’t Know

As we all know, Good quality Nails and the bulk nails supplier are the most important components of any building construction. But how much do you really know about the common nail? Well, nothing! We have seen experts using 8d common nails for attaching the roof sheathing to the framing. Most nails are technically called wire nails by wire nail manufacturers because they’re cut from long strands of solid-metal wire. The most common nail material is steel. Steel nails for indoor projects may be plain steel (called bright) or they may be coated with resin or other materials to make them easy to drive into the wood; these are often called sinkers.

Similarly, some experts advise sticking to the 6d ring shank nails for attaching the OSB sub-floor to the floor framing. But how they really decide? What do these all mean?

First and foremost thing, there is no prior rule related that mandates what wire size a manufacturer has to use to make a certain size nail. The nails are basically sized by the length and diameter of the wire used to make the nail.

for most common nails used for framing, The National Design Specifications For Wood Construction (NDS) has specified some prior length and diameter sizes. Let us understand it better with the help of some examples:

Posted on January 22, 2020 by kara mindustria

Choosing Nails For A Roof: Your Best Picked Options To Consider

If you are planning for a roofing project, you have a fundamental question to answer: what should I pick? staples or nails? The answer is yes! But picking up the best nails from coil framing nails supplier is what matters! Today, in this handy guide, we are going to discuss the prior information regarding picking up the best nails for your home construction project. What are those? Stick to us and keep reading:

Roofing nails:

Picking up the best nails is a very vital step in planning for a re-roofing. There are several nails variety available, but nails specifically for a roof are designed for nailing shingles.

Roofing nails are made of both stainless steel as well as aluminum. They also have very large, broadheads in comparison to the most other nails. Basically, these nails are not measured by “pennies” but rather by inches and are clearly labeled as roofing nails.

Karma Industries has been supplying the hot-dipped galvanized roofing nails for more than 14 years. Hence, we have the rich experience of the product and the usage.

Galvanized nails:

Although galvanized nails are very important but still, it is known to very few people that there are different types of galvanization available. Always go for the nails that are “hot-dipped,” they always provide the best highest quality of zinc coating. On the other hand, Electro-plated nails lose their coatings more easily and thus, it is advised to avoid them if possible.

In addition to this, if you use metal panels instead of shingles, you need to get fasteners from a different angle.

Time to sum up:

Hence, these were some of the prior information regarding picking up the best nails for your home construction project. You must choose stainless coil nails supplier or any other nail type supplier very wisely. Only reputed nail manufacturers and suppliers like Karam Industries never compromise with quality.

Posted on January 14, 2020 by kara mindustria

The Ultimate Guide To Collated Framing Nails

Collated framing nails are a kind of nail that is connected together in strips used in construction and carpentry. Today, in this blog post, we are going to discuss the details regarding collated framing nails. Stick to us and keep reading to find out more:

1. What are collated nails?

2. Different Types of Nail Collation

Let us discuss the terms in detail:

1. What are collated nails?

Collated nails are basically used in nail guns. These are arranged in a strip or coil and are connected using glue, plastic, paper or wire.

2. Different Types of Nail Collation

The different types of nail collation completely depend on the application required along with the weather and temperature conditions. Also, test them out first to see which works best depending on the conditions.

Some of them are as follow:

A. Paper Collation: Paper Collation is an environmentally friendly product, which results in a cleaner job site. It is mainly used in fasteners or framing nails to wrap them at a degree of about 30 to 34.

Karam Industries is committed to providing the most cost-effective and efficient nailing solutions available. We can offer you the wide range stainless coil siding nails (from 2.1mm to 3.3mm) and in the different finish (anti-rust, zinc galvanized, hod dipped galvanized).

B. Plastic collated nails:Plastic collated nails are generally used to hold the nails in a strip or coil. Plastic strip and plastic band are two kinds of plastic collation.

Plastic Strip: such nails are commonly found on construction and carpentry sites. It basically holds framing nails angled 20 to 22 degrees and sometimes at 15 degrees too!
Plastic Band: such collated nails eliminate a lot of the issues that the plastic strip offers. It basically holds framing nails angled 15 degrees.

Founded in 2004, Karam Industries are a well-known wire nail manufacturer in the market today! Our diligence to customer service and extensive product knowledge ensures you receive best-in-class support – every single time. Contact us today!

Posted on December 20, 2019 by kara mindustria

An Insight Into The Products Of Karam Industries

Founded in August 2004 in Luanda Angola, Africa Karam Industries is one of the fastest-growing companies in the country. We are currently one of the leading construction nails suppliers and we also manufacture other items like cables, casting copper rod rolling, automobile ancillaries and timber, both for households and companies. With our hard work and dedication, we have today branched out our operations in Benin, Congo/Kinshasa, and Congo/Brazzaville.

We are proud to say that Karam Industries employs varied professionals who help manufacturers of industrial products with complex business issues besides helping them navigate and understand the evolving industry landscape.

The Products We Manufacture

Nails/Fasteners – We are one of the leading bulk framing nails suppliers in Africa and manufacture a diversified range of nails that include 21-degree plastic strip framing nails, 15-degree wire coils framing nails, 15-degree wire coils siding nails, metal cap nails, duplex nails, common nails, sinker nails, finish nails, box nails, roofing nails, square boat nails, etc. We also manufacture other types of fasteners that include nuts and bolts. Our nuts & bolts are corrosion resistant and easy to install.

Lead – We manufacture a wide variety of lead products and supply them to high precision industries. Our lead products include the following: machine cast lead, lead anodes, etc.

Timber – Besides the abovementioned products, we also operate two sawmills. Our logs are mainly sourced from owned and managed forests that are managed and sustained by following the best international and environmental practices. Our sawn board output is kiln-dried before being converted to a finished product for the market through various secondary processing activities, i.e. end-trimmed, ripped, sized, etc.

Besides these, we also supply cables and wires, lead, ancillaries, etc.

We believe that Karam Industries has made a mark in the industry because of its product innovation, the superior quality of products and its ready availability. Our manufacturing unit is state-of-the-art and has been designed by world-renowned suppliers of machinery and technology. We at Karam Industries understand the importance of both aesthetics and performance and so, we believe in offering

Competitive Prices
Reliable & consistent quality of products
On-time delivery
Product development for a changing market
Targeted stocking policy
Technical support for applications and projects

Posted on December 20, 2019December 20, 2019 by kara mindustria

Why Should You Choose Plastic Collated Framing Nails over Others?

With the use of nail guns, construction has been way easier and less time consuming. It does not require nailing one nail at a time into a hard surface such as wood, concrete, plastic or any other material. With the help of a nail gun a handler can easily nail down nails into the intended surface within a short time. However, there are specific nails which are needed to load in a nail gun. Coil nails or collated nails which bind in a line with one another are the types which fit into a nail gun. A chain of nails which is attached together forms a coil which is then loaded into the gun. When the handler shoots the gun, each time one nail is realized and forcefully inserts the intended surface.

While you would look for coil framing nails supplier, you can get in contact with Karam Industries. They produce one of the finest coil nails at a competitive price. Not only are they the manufacturer, but the supplier as well for various types of nails and fasteners.

Here are the initial reasons why you should choose a plastic collated framing nails over others:

· Low cost- Most constructors prefer plastic collated framing nails for its low cost. The price of these nails is comparatively less than other collation such as paper.

· Easily available- You can find plastic collated nails mostly at all available hardware stores near you. Due to its popularity and extensive use, it is widely available in the market. It can easily be ordered online in bulk from Karam Industries as well.

· Can be stored for a long time- Unlike paper collated framing nails, plastic collated nails can be stored for a longer time without damage. Paper can be damaged when it comes in contact with water or heat, but in case of plastic, it retains its form for a long time.

· Safe for use- while you use collated nails along with a nail gun, it becomes safe for use. It eliminates chances of an accident as a hammer is not at all involved and the handler only has to drill the nails individually into the surface.

· Fits most nail guns- Plastic collated framing nails come in various shank sizes and count. However, most nail guns are made to fit nails that are easily available.

· Available in various specification- Plastic collated nails are available in various specification including head size, shank size, length and overall diameter. It also comes in various collation count which makes it ideal to efficiently fit in nail guns.

Posted on December 20, 2019December 20, 2019 by kara mindustria

Steel Nail and Wire Nail- Build and Use

Nails are mainly made of steel. The wide use of steel in nail production is because of various reasons such as durability, low cost and easy availability of raw material. However, nails are produced from other metals as well, such as copper, iron, aluminum and bronze. The use of such materials affects the overall cost as well as the durability of the nails. Hence, steel nails are the most preferred by the industry. Stainless steel nails have gained immense popularity over time as it is a perfect match for outdoor work where the nail will be exposed to rain or damp.

Karam Industries is one of the leading Steel Nail Manufacturers. They produce steel nails in various shank sizes, and head size. The sharp end of the steel nail helps to penetrate into the surface of wood or concrete. With the introduction of Galvanized or stainless-steel nails, it has increased the durability of the same. Steel nails are great for outdoor use as they keep away from rust and thus cannot be damaged by harsh weather conditions. In case of indoor use, steel nails are also impressive. Due to their smooth finish and shiny surface, it looks identical to the interior and gives a smooth finish to the walls. Steel nails are also used for carpentry and other DIY construction works.

On the other hand, wire nails are manufactured from iron wires. These are the most common type of mainly found in our household work. Karam industria is amongst the leading wire nail manufacturers who concentrates on product quality. Wire nails are manufactured from coil wires. With the help of a machine, it is cut into specific size with a flattened head. During the production process of a wire nail, it leaves a gripper mark just below the head of the nail, and this works as extra grip purpose.

Wire nails are widely used for many constructions works as well as household DIY construction work as well. The immense popularity of this nail is due to its low price and easy availability. However, there are various specifications of wire nails which makes them appropriate for different construction jobs.

While you buy nails in bulk from Karam Industries, be assured of the quality. They will ensure to reach the product at your convenience while maintaining the quality of the product. Check out the other types of nails manufactured and supplied by Karam Industries and order the best nails for your next construction project.

Posted on November 22, 2019 by kara mindustria

Reputed Duplex Nail Supplier- Knows the Application of Duplex Nails More Than Anyone

Duplex Nails are more commonly recognized as double-headed nails. It was once known as scaffolding nails, as well. They are used mainly for temporary projects because they are easy to remove. Before we go ahead with more details about duplex nails and which duplex nail supplier is one of the most trustworthy, let us discuss some details about the history, common uses, and sizes available for duplex nails in the market.

Let’s dive into the topic then;

History of Duplex/ double-headed nails- These nails were mainly invented for scaffolding work because disassembling them is a straightforward task as that of others. So, people who are involved in temporary wood scaffolding use duplex nails the most. Then when metal scaffolding became more common than wood scaffolding, people started calling double-headed nail as DUPLEX NAILS. So, the duplex nail is more common terminology these days.

Common uses of Duplex nails- as we mentioned earlier, you will see duplex nails mostly in temporary projects like while fastening wood forms in concrete pouring projects. These nails are used right at the time when concrete is poured. This is suitable for concrete pouring projects because the wood forms are easy to remove from standard hammer once the concrete gets hardened. We can yank the nails out using the second head of the duplex nails. It seems easy, right? Indeed, it is a hassle-free task.

Size- Nails size is commonly designated as penny size, as well. This penny size is in-turn referred to as “d,” and you can find 2d (2penny) nail size to 60d (60penny) in the market. 2d is 1inch long, and 60d is inches long. You may discover nails smaller than 2d, but they are known as “brads.” while the term “spikes” is used for nails more than 6inches.

Choosing the right size of nails, depending on the project where you are going to use it, plays a crucial role. All of us know that almost two-thirds of every nail is inserted inside the base. Hence, you must choose the right length of the nail.

About Duplex & 60d Nail supplier-

Once you know which nail size you need, the time comes for choosing the right nail supplier from so many companies available today. Be it a duplex nail, box nails, coil nails, or 60d nail supplier; you must choose a reputed supplier that is known to manufacture premium quality nails with précised size.

Posted on November 21, 2019 by kara mindustria

Spend on Quality Nails When It Comes to Construction Work

Nails are one of the smallest tools that are used during construction. Usually, constructors don’t pay much importance to the quality of the nails used during construction. But in the long run, it might show adverse effects, which are caused due to the use of poor-quality nails. However, there are many other factors which combine up for selecting the best nail for your construction site. While you choose the best quality nail for your construction work, it might be a little demanding in terms of price. But make sure you choose reliable construction nails suppliers who deals on quality nails.

Let’s take a look at why should we spend on quality nails when it comes to construction?

Smooth finishing of the construction work- When we use nails for construction, we try to make it as seamless as possible. The nails go inside the concrete and are covered with a layer of cement. In some cases, it is noticed that after a few years, the area seems bumpy. This is due to the dislocation or expansion of the nail, which gives the wall a bumpy look.

To resist breaking or corrosion of nails- When we use poor quality nail at a construction site, we notice that most of the nails break due to pressure. Bending of nails while drilling it on the surface is another common problem. However, these problems may cause accidents and will definitely take a longer time for the overall construction work. To avoid such consequences and to finish the work early, it is advisable to use quality nails.

Topcoat for longevity- Quality nails come with galvanized top coat. This restricts the nail form corrosion even after years of use. Corrosion is not only a problem for nails that are used for outdoor construction, but the moisture from the cement can also cause rusting or corrosion on the nails. You can buy quality nails from galvanized coil nails supplier such as Karam Industries.They are one of the leading manufacturers and suppliers of quality nails in Europe, The USA, and Asian countries.

Quality comes first- The raw material used for nail manufacturing also has a strong effect on the overall quality and finish of the nails. Karam Industries use superior quality nail wire for manufacturing nails. Their Taiwanese technology and machinery help them to produce the best quality nails for every construction use.